Fish room air pump setup

Discussion about cichlid tank filtration

Moderator: Ken Boorman

Post Reply
User avatar
Jshakour
Posts: 682
Joined: Sun Nov 30, 2008 4:20 pm
Location: Northeast Ohio

Fish room air pump setup

Post by Jshakour »

I recently purchase an AP-60 air pump, I have 15 tanks the deepest being 17 inches.

my question is..... what size PVC should I use? inch / 1 1/4 or 1 1/2 and why?


the longest straight run would be about 12 feet and i would set up to run in a loop.
---------------------------------------------------------------------------
-James
nick a
Posts: 68
Joined: Wed Jun 11, 2008 1:25 pm
Location: Austin, Texas

Re: Fish room air pump setup

Post by nick a »

Can't tell where you're located, but here in USA typically 1" is very readily available (& cheap!). That size will function perfectly for your application. The only advantage using 1.5" is that some folks find it easier to drill the tap holes in the larger diameter.
User avatar
Jshakour
Posts: 682
Joined: Sun Nov 30, 2008 4:20 pm
Location: Northeast Ohio

Re: Fish room air pump setup

Post by Jshakour »

I am in Ohio.
---------------------------------------------------------------------------
-James
User avatar
Jshakour
Posts: 682
Joined: Sun Nov 30, 2008 4:20 pm
Location: Northeast Ohio

Re: Fish room air pump setup

Post by Jshakour »

I went with 1 inch pvc and everything is working very nicely! I have a few minor tweaks but all is good! Thanks for the help!
---------------------------------------------------------------------------
-James
Post Reply

Return to “Filtration”